建筑构件的火灾危险性评估

火灾中,起火建筑的内部构件以及相邻建筑物的外部构件都要受到火灾高温及火焰热的作用。本文定量评估了威胁上述建筑构件的火灾因素．旨在为人们综合考虑采取合理的防火技术措施提供理论依据。     

坦克柴油机比油耗实车测试的研究

针对实车检测坦克柴油机比油耗的原理和方法作了探讨,对12150L柴油机进行了实车比油耗测试,认为用无负荷方法实车测定柴油机有效功率,同时用涡轮流量计测量燃油消耗量是实车测量发动机比油耗可行的方法。     

奇异积分方程在裂纹板条动态断裂分析中的应用(I)

利用积分变换方法,将含Ｇｒｉｆｉｔｈ裂纹的无限长板条问题转化为Ｌａｐｌａｃｅ变换域中一Ｃａｕｃｈｙ型奇异积分方程。通过求解奇异积分方程和对裂纹尖端场的渐近分析,获得了Ｌａｐｌａｃｅ变换域中的动态应力强度因子。     

Adaptive fault-tolerant control based on boundary estimation for space robot under joint actuator faults and uncertain parameters

Since the joint actuator of the space robot executes the control instructions frequently in the harsh space environment, it is prone to the partial loss of control effectiveness (PLCE) fault. An adaptive fault-tolerant control algorithm is designed for a space robot system with the uncertain parameters and the PLCE actuator faults. The mathematical model of the system is established based on the Lagrange method, and the PLCE actuator fault is described as an effectiveness factor. The lower bound of the effectiveness factors and the upper bound of the uncertain parameters are estimated by an adaptive strategy, and the estimated value is fed back to the control algorithm. Compared with the traditional fault-tolerant algorithms, the proposed algorithm does not need to predetermine the lower bound of the effectiveness factor, hence it is more in line with the actual engineering application. It is proved that the algorithm can guarantee the stability of the closed-loop system based on the Lyapunov function method. The numerical simulation results show that the proposed algorithm can not only compensate for the uncertain parameters, but also can tolerate the PLCE actuator faults effectively, which verifies the effectiveness and superiority of the control scheme.     

A hybrid method for simulation factor screening

Factor screening is performed to eliminate unimportant factors so that the remaining important factors can be more thoroughly studied in later experiments. Controlled sequential bifurcation (CSB) and controlled sequential factorial design (CSFD) are two new screening methods for discrete‐event simulations. Both methods use hypothesis testing procedures to control the Type I Error and power of the screening results. The scenarios for which each method is most efficient are complementary. This study proposes a two‐stage hybrid approach that combines CSFD and an improved CSB called CSB‐X. In Phase 1, a prescreening procedure will estimate each effect and determine whether CSB‐X or CSFD will be used for further screening. In Phase 2, CSB‐X and CSFD are performed separately based on the assignment of Phase 1. The new method usually has the same error control as CSB‐X and CSFD. The efficiency, on the other hand, is usually much better than either component method. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

一种消除直线永磁无刷直流电机边端效应对换相时机影响的方法

电磁弹射用直线永磁无刷直流电机的永磁体动子具有开断结构,使动子边端的磁场分布发生变形。当采用霍尔元件检测磁场实现换相时,这种边端效应就会影响换相时机。分析了这类电机的换相机理和动子开断结构对换相时机的影响,指出这类边端效应受极弧系数影响显著,并提出了利用不对称滞环比较器或简易单限比较器对霍尔输出信号进行处理从而消除这类边端效应影响的方法,实验验证了简易单限比较器方案的可行性。     

Models for production planning under power interruptions

We present a robust optimization model for production planning under the assumption that electricity supply is subject to uncertain interruptions caused by participation in interruptible load contracts (ILCs). The objective is to minimize the cost of electricity used for production while providing a robust production plan which ensures demand satisfaction under all possible interruption scenarios. The combinatorial size of the set of interruption scenarios makes this a challenging problem. Furthermore, we assume that no probabilistic information is known about the supply uncertainty: we only use the information given in the ILC to identify an uncertainty set that captures the possible scenarios. We construct a general robust framework to handle this uncertainty and present a heuristic to compute a good feasible solution of the robust model. We provide computational experiments on a real‐world example and compare the performance of an exact solver applied to the robust model with that of the heuristic procedure. Finally, we include the operational impact of interruptions such as “recovery modes” in the definition of the uncertainty set. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

有限声速的纯方位算法

针对纯方位条件下对等速直航目标观测的算法问题,将目标运动要素及平均声速作为待估计参数,给出了计算非线性最小二乘法目标函数梯度与Hessian矩阵的解析公式,基于这些公式,可以构造估计目标运动要素的一些算法及编程实现。部分数值实验表明,信赖域算法、Levenberg-Marquardt算法与Matlab用于解非线性最小二乘问题的函数lsqnonlin的计算精度基本一致。     

伺服系统速度环控制器参数的自整定及优化

针对交流伺服系统速度环控制器参数自整定及优化的需求,为使工程技术人员避免繁琐的调参过程,提出了一种基于转动惯量辨识的速度环控制器参数自整定及优化方法。首先,采用频率法分析伺服系统速度环控制器参数的设计规则;随后,采用遗忘因子递推最小二乘法,对控制器参数设计所需的系统转动惯量进行辨识;最后,在此基础上利用设计的变步长迭代算法,完成控制器参数寻优过程。仿真结果表明,采用遗忘因子递推最小二乘法,能够有效辨识出电机轴端的转动惯量。提出算法进行整定及优化后,速度环控制器参数能使系统具有良好的动态响应和鲁棒性。     

摆动喷管控制精度相关问题讨论

对不同性质的喷管特点以及在控制力作用下喷管的响应特性进行了初步分析;以某防空导弹为例,阐述了摆动喷管在非理想状态下摆动时作动器牵连运动、正负摆角不对称、力臂变化、摆心漂移、位移传递系数精度和预调角对摆角控制的影响;同时说明了负载力矩和伺服机构相关参数影响着摆动喷管位置控制精度。